When talking about any profession, most people tend to focus on the here and now. That's understandable. it's really important to know what's going on in the present tense. But you are missing out on some vital information if you never read and learn about the history of a profession. This applies to plumbing, in particular. You can really further your understanding of the profession by knowing how it began and what changes have been made over the years. That's why we sometimes reference the history of plumbing on this blog. We'll also dive into the future of the profession from time to time because, after all, you have to know where you're headed.
When you flush your toilet or run water down your sink, it goes into the sewer line that leads out of your house. That sewer line will meet up with the larger line that runs under your street, and that line will eventually meet up with a larger line until everything gets to the sewerage treatment plant so that it can be treated. Most sewer systems are gravity-driven, which means that as the sewer lines get bigger on their way to the treatment plant, the lines tend to get deeper. But, the ones near your house are going to be very close to the surface. If you have a problem with your sewer line, you need to call a plumber and have them come out to your house as soon as possible.
Find the Problem
One of the things that the plumber can help you with is to figure out where the problem is. If they can't see the problem right up by your house, the plumber may have to go looking for the problem. That can mean that they will have to get into the emergency access pipe outside your house. It may also mean that the plumber has to get into the sewer outlet down by the street so that they can run a camera through your sewer system to find the problem. They need to know where the problem is so that they can fix it. You need to know where the problem is so that you know whose responsibility the repairs are going to be. If the problem is on your side of the connector from your sewer line to the mainline, it is likely to be your responsibility. If the problem is on the other side, then it may be the city's job.
Clearing the Problem
Depending on how big the problem is, your plumber may have to use a waterjet to clear out the problem. A waterjet is attached to a hose and fed down into the sewer line until it gets to the clog. The plumber will make sure that there is water going through the hose and the water that is coming out of the jet will be coming out very quickly and under high pressure. The narrow spray will be able to cut through anything that is clogging your sewer line, up to and including tree roots.
If you have a sewer problem, then you need to call a plumbing service (for instance, Gene Johnson Plumbing) and have them come out and check your sewers for you.Share